Under Floor Heating cables

UNDERFLOOR HEATING CABLES

We offer heating cables with predefined spacing and laid on Fiberglass mats with different power to make the installation of the heating system much easier and faster. that’s why most of the installers are giving preference to install heating mats. We have two variants of heating mats. single conductor cable mats are manufactured with single conductor cable containing cold tails at both ends of mat.

SPECIFICATIONS:

Cable properties	Twin conductor screened : 4.50MM
Wattage	150W to 3000W
Voltage	230V
Watt per mtr.	10W/M to 30W/M
Cold tail length	1 X 3M PVC
Inner conductor insulation	PTFE, FEP or ETFE
Screening	Bare copper braid or drain wire with aluminum foil
Outer jacket insulation	PVC
Outer diameter of cable	Approx. 4.50mm
Tolerance Ohmic range	-5% to +10%
Packing	Long length or pre cut lengths in coils or reels